|
|
|
Forum Member
 
Group: Forum Members
Last Login: Wednesday, July 09, 2008 5:59 PM
Posts: 30,
Visits: 47
|
|
Client has two subnets 192.168.1.0 and 192.168.2.0. I have the VSA/ESX configured per the diagram in the VSAManual.pdf. The VSANet nic (only need one nic because I cannot bond in VSA?) is set for 192.168.254.0/24 (.1 & .2 respectively).
The VIP(the address the Console connects to?) is 192.168.2.18 & 1.18.
Which nic do I connect to my VSA VLAN that spans between sites? Currently in Sites config I show 192.168.1.18 and 192.168.2.18. I am thinking I need to change these to 192.168.254.1 and .2? If so, what address does the console have to connect to?
What subnet should my volumes be on? Does the ESX internally bridge the virtual switches together?
Almost there,
Regards, Rich
HP ML350 SATA with VSA
|
|
|
|